| |
| TECHNICAL DATA |
|
| Description |
CDR 150 (CORE) |
CDR-150 (DTH) |
| Drilling Capacity |
| Regular Drill hole Diameter |
76 mm(Core:Ø 54 mm)
|
114.3 mm(Ø 4.5”)
|
| Maximum Drilling Depth (Regular) |
450 Feet. |
500 Feet. |
| Over Burden Drill hole Diameter |
--- |
165.0 mm(Ø 6.5”) |
| Over Burden Max. Drilling Depth |
--- |
120 Feet. |
| (Under favorable drilling conditions) |
| MAST |
| Overall Length |
6150 (+/- 50 mm) |
6150(+/- 50 mm) |
| R. H. Travel |
4200.0 mm |
4200.0 mm |
| Rod Handling Capacity |
3.0 Mt. (10 Feet) |
3.0 Mt.(10 Feet) |
| Bottom Guide |
Ø 240.0 mm (Ø9.5) |
Ø 240.0 mm (Ø9.5”) |
| Hydraulic System |
 Primer Mover |
Deck Engine |
Deck Engine |
| Feed |
| Pull Back/Up Force |
4,500 Kg.f. |
4,500 Kg.f. |
| Pull Down Force |
2,300 Kg.f. |
2,300 Kg.f. |
| Pull Down Speed |
30 m/min. |
30 m/min. |
| Pull Back/Up Speed |
24 m/min. |
24 m/min. |
| Rotation |
| Speed |
0_625rpm |
0-100 rpm |
| Torque |
59.0kg.f-m |
230 Kg. f-m |
| Air Compressor |
Minimum Suggested
(for DTH Drilling) |
-N.A-) |
100% CFM @ 200 PSI |
| Hydraulic Oil Cooler |
| Capacity |
40 GPM US |
40 GPM US |
| Type |
Fin type: Oil to Air |
Fin type: Oil to Air |
Drive
|
Hydraulic Motor |
Hydraulic Motor |
| Auxiliary Wireline Winch |
| (Optional) |
800Kg.f @ 40 Mt./min |
800Kg.f @ 40 Mt./min |
| Water Injection Pump |
| Capacity Suggested Min. |
36 LPM @ 30Kg.f/cm2 |
36 LPM @ 30Kg.f/cm2 |
Drive & Mounting
(optional) |
Hydraulic |
Hydraulic |
|
|
|
|
|
